M45 standard mobile stage

Technical specifications

Roof structure: standard

Stage dimensions (unfolded): 7.5 m x 6.0 m x 5.0 m

Trailer dimensions (folded): 8.9 m x 2.45 m x 3.6 m

Roof elevation mechanism: manual-hydraulic or electro-hydraulic

Stage floor levelling mechanism: manual or electro-hydraulic

Permissible maximum gross weight: 2,500 kg

Stage floorspace: 45 m²

Stage floor height: 1.0 - 1.3 m

Stage floor surface: anti-slip, weather-resistant

Roof load capacity:

• Load capacity of 300 kg spread evenly at the front and the rear of the roof (end tube)
• Load capacity of 70 kg spread evenly at the front and the rear of the roof (middle tube)
• Load capacity of 500 kg spread evenly in the middle of the roof

Stage load capacity: 3.5 kN/m² (350 kg/m²)

Rectangular (grid support) pillars load capacity: 50 kg

Flying towers load capacity: 250 kg (in the centre)

Maximum wind speed: Wind zones 1-3., with the exception of coastal areas with a minimum width of 5 km, as well as islands of the North Sea and the Baltic Sea, where a maximum of 17.8 m/s with hind and side panels and a maximum of 27.5 m/s without panels is applicable

Permissible maximum thickness of snow on the roof: Mobile sections may only be used in snow-free times; otherwise, effective measures (for instance installation of adequate heating) need to be taken to clear the snow

Canopy material: PVC-certified material (flame resistant)

Side panels (rim) material: A203 (white or black)

Installation time: 30 minutes (1-2 member(s) of staff)